For Users - Vermeiren Linx Memory Positions Benutzerhandbuch

3. Using LiNX Memory Positions
CAUTION
6
Risk of injuries or damage
• First read the manual of the operating console.
Your wheelchair with LiNX Memory Positions system is delivered with standard configurations.
Users and specialised care providers can each program two preset sitting positions to overwrite
these standard configurations.
• Comfort (D, C1) : User positions
• Clinical (D, M1) : Therapeutic sitting positions, set by specialised care providers
Therapeutic sitting positions can be used by the wheelchair user, but they can only be altered by
the care provider using a dongle to access the settings menu.
If the user does not need any therapeutic sitting positions, the specialised care provider can
4
leave these positions unlocked, allowing the user to manage all 4 available positions.

3.1. For users

3.1.1. Using preset positions
CAUTION
6
Risk of injuries
• All parts of the wheelchair (backrest, seat, leg rest) will move simultaneously once a stored
position is chosen. Make sure that no body parts can be trapped or squeezed between
moving parts of the wheelchair.
1. Navigate through the S-menu (for adjusting the body position) on the touchscreen until you
reach the "Comfort" or "Clinical" submenu.
2. Press the joystick to the front or back, according to which position you want to assume. The
relevant wheelchair parts will start moving.
3. If you want to stop the automatic movement, shortly press the joystick again.The wheelchair
parts will stop moving immediately.
User manual | 2025-02 6 LiNX Memory Positions