Vermeiren LiNX Memory Positions Benutzerhandbuch Seite 8

3.2. For specialised care providers
Specialised care providers can preset two therapeutic sitting positions that can be used but
not altered by the user. To alter the Clinical positions, a dongle is needed to access the settings
menu. Alterations can be done via desktop, or via smartphone.
1. Open the program menu on your desktop or smartphone and go to the "Positions" tab.
2. Open the position you want to update.
3. Under the "Configuration" section of the selected position, set "Allow Occupant to Update
Position" from OFF to ON.
4. Upload the program to the wheelchair.
5. Change and save the sitting position of the wheelchair to the desired therapeutic position
according to the instruction in §3.1.2..
6. On your desktop or smartphone, set "Allow Occupant to Update Position" back from ON to
OFF for the selected position.
7. Upload the program to the wheelchair.
If locked Clinical positions are not necessary, you can open up all positions to be
4
programmed by the user by following steps 1-4.
User manual | 2025-02 8 LiNX Memory Positions