Gb Reversing The Door M190 - Danfoss M150 Servicehandbuch

GB
Reversing the door for M 190
It is recommended to place the unit on its
back on the floor.
If reversing the door with the unit in normal
position, then it is recommended to be two
induvidals. If this method is used the unit
must be placed in normal upright position at
least two hours before connecting to power.
Extension cords and terminal block are
optional. Request a spare parts list.
1. Disconnect electrical connection
The canopy can be removed as follows:
a. Remove the two screws at the bottom
of the canopy.
b. Remove the two screws at the top of
the canopy. Then the canopy can be
removed.
18