Setting The Temperature - Danfoss RET2000 B Benutzerhandbuch

Setting the temperature

Press either the Λ or V buttons, the product backlight will come
GB GB
on.
DE
Press either the Λ or V button again within 6 seconds, the
display will fl ash with the current set temperature. While
DK
the display is fl ashing press the Λ arrow to increase the set
temperature to the required setting or the V arrow to decrease
the set temperature.
ES
If no buttons are pressed the display will return to actual
FR
temperature after 4 seconds and the backlight will go out after
6 seconds.
NL
Thermostat status (heat mode only)
RU
A fl ame symbol will be lit whenever the thermostat is calling
for heat.
TR
8 RET1000