Danfoss M150 Servicehandbuch Seite 14

GB
7. Remome the bush and door closer by
use of a pincher.
Place the bush in the opposite side of
the door. Do not place the door closer
yet.
8. Lift up the door. The wires from the door
are pulled up together with the door pin.
Place the door pin in the opposite side of
the cabinet.
9. Rotate the door 180 degrees. Place the
door, with the front facing down, on a soft
surface.
Remove the gasket in the left side and
pull out the wires for the door light.
14