Danfoss M150 Servicehandbuch Seite 19

c. Unscrew the bracket on the left side.
Then follow steps 2-5 from page 10.
6. Unscrew the canopy bracket and the
door hinge on the right side.
This door hinge is reversible
NOTE: The door is now loose!
Be careful that the door does not fall
down!
Mount the brackets one on each opposite
side.
Then follow steps 7-19 from page 12.
Change the canopy logo
Remove the canopy. See 1a and 1b page
18.
Then remove the screws as shown and the
logo can be pulled out.
19
GB