Gaps In Printed Labels; Ink Leaks And Smudges; Distorted Labels - Renkforce Rf-Hip-001 Bedienungsanleitung

17.5 Gaps in printed labels

Problem:
1
Gaps appear in printed labels.
Solution:
2
1. Release trapped air by removing the cartridge.
2. Install the cartridge again.

17.6 Ink leaks and smudges

Problem:
1
Ink leaks and smudges appear in printed labels.
Solution:
2
1. Replace the ink cartridge.

17.7 Distorted labels

Problem:
1
Printed labels are distorted
Solution:
2
The problem is caused by incorrect label calculations. Calculations rely on the the input
from the rollers.
Check that both rollers rotate freely.
Check that all rubber rings are installed and not damaged. Replace damaged rub-
ber rings.
53