Printing; Print Configurations - Renkforce Rf-Hip-001 Bedienungsanleitung

16 Printing

The printer supports different printing modes to suit your application. Before printing, perform general print job configuration and specific configurations depending on the print
mode you wish to use.

16.1 Print configurations

Enable/Disable
button sounds
Mirror the label
Label width
stretch factor
Encoder or timer*
Set signal that starts
the print job*
* Specific print mode settings. Refer to the respective print mode for details.
Enable/Disable print job
completion signal. The start
signal is always audibly
confirmed.
Set the print direction from
left to right
Max number of print jobs after
which to stop printing.
Enable to repeat printing the
same label N times. Define a
delay between each print job.
47