Klarstein IGNITO TIMER Bedienungsanleitung Seite 45

EN
Smart burner switch
After ignition, you can set a time or power. Tap the smart burner switch to start
setting the time or power of the burner. The icon in the display shows which timer
or power you are selecting. Tap again to toggle between timer and power.
Time or power settings
After selecting the timer or power, tap + or - to set and change the time or power,
tap the button to set the time, short tap to add/remove 1 minute at a time, long
tap for quick set, the setting range is 1-180 minutes.
Tap the button to set the power, short tap to add/remove 10°C, long tap for quick
setting, setting range is 140°C-210°C.
If no operation is performed for 5 seconds, the current time will be confirmed.
After setting the power, the H icon will flash to indicate that it is running at full
power, and the H icon will stop flashing to indicate that it has reached the set
power and is currently running at low power.
Modify current settings
If you want to change the current time or power, go to step 5.
Cancel scheduled work
To cancel the scheduled operation, press and hold the - and + buttons
simultaneously. The burner will continue to operate as a normal burner. If you
turn the knob to the OFF position as in step 3, both the timer and the flame will be
turned off.
End timer
At the end of the countdown, the burner will switch off, please turn the knob to the
OFF position. The hob will beep to remind you when there are 3 seconds left.
45