Siemens SIMATIC S7 CPU 412-1 Produktinformation Seite 2

CPU 412, 414, 416, 417
English
This Product Information contains additional information about the following products. It is a
separate component and should be considered more up-to-date than the information in the
manuals and catalogs if uncertainties arise.
The technical data are contained in the reference manual S7-400 Programmable Controllers
CPU Specifications A5E00165965 as from Release 01. This is part of the documentation pak-
kage with the Order Number 6ES7498-8AA03-8BA0.
The use of the current STEP 7 version or of the engineering tools is only then required, if, in
contrast to the previous firmware version, the current CPU has new functions and you want to
use them. Accordingly, when replacing an old CPU with a CPU of current firmware the following
applies: As long as you do not want to use any properties which exceed the performance
range of the exchanged CPU, you can use the CPU with the old order number and old
firmware version when configuring in HW Config.
A5E00084213-06
2