Pixsys ATR243 Bedienungsanleitung Seite 97

Pv
On
Off
Absolute Alarm or Threshold Alarm Referring to Setpoint
Command (
On
Off
Time
Alarm Spv
Hysteresis
parameter
On
Alarm
Off
output
selection )
Comand Spv
Hysteresis
parameter
Alarm Spv
Time
Alarm
Off
output
Absolute alarm with controller
in cooling functioning
(Par.11
) and hysteresis value
less than "0" (Par.28
< 0
0).
N.B.: The example refers to alarm 1;
the function can also be enabled for
alarms 2 and 3 on models that
include it.
Absolute alarm refers to the
command set, with the
controller in heating
> 0
functioning
(Par.11
and hysteresis value greater
than "0" (Par.28
The command set can be
changed by pressing the
arrow keys on front panel or
using serial port RS485
commands.
N.B.: The example refers to alarm 1;
the function can also be enabled for
alarms 2 and 3 on models that
include it.
selected
<
selected
> 0).
)
43