SCANCOOL BB211SLBB Bedienungsanleitung Seite 36

Placing goods in the commerical cooler
Instructions for storage goods
This product has a circulation of cold air in the system. If circulation of cold air is obstructed, the items
will not be adequately refrigerated.
Pay attention to the following points:
• Do not let items obstruct the cold air inlet and suction outlet.
• Place items so that they do not protrude from the shelves, the gap between the shelves and the
door is used for circulation of cold air.
• Place items evenly on all shelves.
• Do not place goods on the bottom, please put goods on the shelf.
Installation commercial coolers
Ventilation condition
The position you select for the product installation should be well-ventilated and has less hot air. Do
not locate it near a heat source or similar and avoid direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the product in a damp place, so as to prevent it
from rusting and leaking electricity.
Level floor
Place the refrigerator on the solid and flat ground (floor) to keep it stable.
Heat dissipation area
When in operation, the product emits heat to the surroundings. Therefore, it is important to have
sufficient ventilation, so that the product can get rid of excess heat.
The more air that circulates around the product in the cabinet, the better it can get rid of the heat.
This product is intended to be used as a freestanding product.
Installation
English 12