SCANCOOL BB211SLBB Bedienungsanleitung Seite 29

the cord could cause wire breakage, possible resulting in
overheating and fire.
• Disconnect the power cord plug from the wall outlet before
moving the unit and make sure that the power cord is not
damaged during transport. A damaged power cord could
result in electrical shock and/or fire.
• The cable/power cord must not be damaged, modified, bent
too much, strained, twisted or bound together.
• If it is unavoidable that the installation is located in a humid
environment, you need to also Install an electrical leakage
circuit breaker. If an electrical leakage circuit breaker isn't
installed, electrical shock could result.
• If heavy objects are placed on the cord or if it is clamped
somewhere with too little space, it can also be damaged,
which may result in electric shock or fire.
• WARNING: If the power supply is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons to avoid danger.
• Sparks from electrical contacts may result in explosion and
fire
• Install the unit in a place where the floor is sturdy enough to
support the unit's load. If the floor is not sturdy enough or
installation is done incorrectly, the device may overturn,
and shelves and products may fall out, can cause personal
injury.
• Leave the disassembly and disposal of the device to
qualified experts.
• Never attempt to insert fingers, sticks, etc. as the fan rotates
at high speed inside the socket. Personal injury may occur,
electric shock and incorrect operation.
• Never place heavy objects or objects containing water, on
top of the unit. Objects may fall and cause personal injury,
English 5