Before Use - Scancool Bb211Slbb Bedienungsanleitung

Before use: commercial coolers
Before using the product, you must do the following:
• Remove the shipping package, tape and duct tape and leave the doors open for a while.
• If side walls, doors, accessories and other things are covered with protective foil, this must be
removed.
• Thoroughly examine the product for any transport damage after unpacking. In the event of
complaints, you must contact the retailer where you purchased the product.
• In case the cabinet has been lying down during transport leave it standing up for 2 hours before
switching it on.
• The unit is cleaned before shipping at the factory. We recommend you clean the cabinet inside an
extra time before use.
• Insert the plug into the socket.
• Let the unit run for approximately 1 hour to cool down the cabinet before placing items in the
product.
WAIT FOR 5 MINUTES OR MORE BEFORE RESTARTING:
Restart the device immediately after that it has been turned off can cause fuses jumps and activates the
circuit breaker, the compressor may be overloaded, and/or other damages may occur.
Installing and adjusting the shelves
The shelves can be adjusted in height. Arrange the shelves according to the dimensions of the goods to
be placed in the product. Do not place items heavier than each shelf can handle. Please see product
specifications. The shelf could fall, possibly causing injury.

Before use

Lighting (LED)
Lamp type: Horizontal LED
Energy Efficiency Class (Light): n/a
The light source in this product can only be replaced by a professional.
English 9