EN
NO
1
3
5
7
9
11
13
15
Operation Panel
Power on or off
Cold drink mode
Snowmelt mode
Milkshake mode
Function Instructions
1.Power Switch
After plugging in, press the SWlTCH button to enter the standby mode, the SWITCH
indicator will light, then you can press other buttons to activate the desired mode.
Press the SWITCH button again to exit the standby mode.
2. Cleaning Mode
In the standby mode, press the RINSE button, the mixer will be driven by the stirring
motor. After discharging the remaining drinks, fill the bucket with warm water and
keep the handle turning to clear the residual drinks and odors. Repeat the step twice.
The machine will automatically stop without operation after 20 minutes.
3. Working Mode selection
In the standby mode, press any of the three buttons (FROZEN JUICE, SLUSH,
MILKSHAKE) to start the production. During the working process, you can switch the
three modes, adjust the hardness and turn on or off the light any time.
Part Name
Handle
Pin
Handle Joint
Bucket Lid
Compressor
Operation Panel
Drip Tray
Air Inlet
NO
2
4
6
8
10
12
14
16
5
Part Name
Spring
Valve Rod
Bucket
Mixer
Drip Pan
Drip Plate
Rotary Rod
Air Outlet
Increase the hardness
Reduce the hardness
Turn the light on or off
Cleaning mode