Recycling & Disposal - Homcom 800-291V90 Bedienungsanleitung

EN
Maintenance
NOTE:
Make sure the power plug is removed before cleaning to avoid possible electric
shock.
1. Take out the bucket and mixer, scrub them clean with a wet cloth.
2. Use a wet cloth to scrub clean the parts with dirt, do not immerse the machine in
water or spill the water into the air outlet/ inlet.
3. Dry all the parts with a dry cloth and install them in place.
TROUBLESHOOTING
PROBLEM
The last indicator of the
hardness bar flashes, and
it will not be displayed
after 10s or when turned
on.
The bottom 2 indicators of
the hardness bar flashes.
The mode light flashes
and the bottom 4
indicators of the hardness
bar flashes.
The mode light flashes
and the bottom 3
indicators of the hardness
bars flashes.
RECYCLING & DISPOSAL
The packaging of your new product has a recycle mark on it. Please
dispose of it as recycled paper. Waste electrical products should not be
disposed of with general household waste. This is to prevent the
possible harm to the environment and human well-being. Contact your
local council or government for information regarding the collection
schemes in your area.
Cause analysis
The ambient temperature
sensor is faulty
Refrigeration temperature
sensor is faulty.
Refrigeration effect is
bad.
Motor failure warning.
12
Countermeasure
Replace the sensor.
Take out the bucket, turn
off and restart.
Place the stirring fan
blades in place.
The machine will
automatically reset after
shutdown.