Care, Checks And Maintenance; Decommissioning / Recycling - Weber Rescue Systems Glasmanagement Betriebsanleitung

7.2 Care, checks and maintenance

To be ready for operation at any time, the following measures are absolutely imperative:
• After every time the parts and items are subjected to loads they must be visually
inspected and functionally inspected at least once a year. When checking, pay
particular attention to damage, wear and missing parts.
• After each use the equipment must be cleaned and freed from any shards or
fragments of glass and glass dust.
• To avoid corrosion, metallic components should be lightly oiled after use.
NOTE!
If problems occur when maintaining the appliances, our customer service
department is available to assist (see chapter 1.4).

8 Decommissioning / recycling

After their operating life has expired, dispose of all components properly.
However, individual parts can be reused.
The local disposal requirements apply to the disposal of all components and packaging
materials. Disposal in domestic waste is not permitted!
NOTE!
Please ask your supplier or the competent local authority about disposal of
the equipment.