General; Information On The Operating Instructions; Explanation Of Symbols - Weber Rescue Systems Glasmanagement Betriebsanleitung

1 General

1.1 Information on the operating instructions

These operating instructions provide important information for using the various products
relating to glassmanagement. The prerequisite for safe working is the correct observance
of all safety and handling instructions given in this document. In addition, the local accident
prevention regulations and general safety rules applicable to the site where the equipment is
operating must also be observed.
Before starting any work you must read these operating instructions thoroughly! They are
a component of the product and must be stored in a known location that is accessible to
personnel at all times. All information, technical specifications, graphics and illustrations
contained in these Operating Instructions are based on the most up-to-date data available
at the time these instructions were created.
In addition to carefully reading the operating instructions, we also recommend that you undergo
training and instruction in handling (possible uses, operational tactics, etc.) from one of our
qualified trainers.

1.2 Explanation of symbols

Warnings
In these operating instructions, warnings are identified by symbols.
The individual warnings are introduced by signal words expressing the degree of danger.
These warnings must be heeded to prevent accidents, injury to persons and property
damage.
DANGER!
... points out an immediately dangerous situation which can cause death
or severe injury if it is not avoided.
WARNING!
...points out a potentially dangerous situation which can cause death
or severe injury if it is not avoided.