Technical Details - Conrad CV Mobil 4200 FM Bedienungsanleitung

European 2 years Warranty & Recycling Information
The distributor, dealer or retail shop where You bought the radio warrants to the
original retail purchaser of this product that should this product or any part of it, under
normal use and conditions, be proven defective in material or workmanship within 2
years from the date of original purchase, such defect(s) will be repaired or replaced
with new or reconditioned product without charge for parts and repair labor. To obtain
repair or replacement within the terms of this warranty, the product is to be delivered
with proof of warranty coverage (e.g. a copy of your bill of sale), specification of
defect(s), to the distributor, dealer or his authorised repair centre.
Liability for communications range of this product is disclaimed. The warranty does
not apply to any product or part there of which, has suffered or been damaged
through alteration, improper installation, mishandling, misuse, neglect, accident, or by
removal or defacement of the factory serial number label(s). The warranty does not
apply to accessory parts or problems caused through not authorised or not
recommended accessories like other than the supplied microphone, external
antennas, external power supplies and over voltage caused through external power
supplies, lightning or over voltage defects via antenna or other cables, broken or
damaged acrylic glass windows and cabinet parts.
Please contact the dealer or person where you have purchased your CB radio.
Recycling: It is no more allowed to put defective or no more used electronic
items into the household trash. Please recycle all electronic devices only via
electronic waste collecting stations, which can be found everywhere in
Europe now. The industry supports electronic waste collection and recycling
for better environment protection!
Microphone socket wiring
Pin 1 Mic audio
Pin 2 Ground
Pin 3 PTT-RX (on ground for receiving)
Pin 4 PTT-TX (on ground for transmit)
Transmitter
Transmitting power
Modulation sensitivity
Harmonic and spurious radiations
Max. frequency deviation
AM modulation degree
Receiver
Sensitivity (FM) (SINAD)
Sensitivity (AM) (SINAD)
Adjacent channel selection
Audio output power

Technical Details

4 Watt FM
appr. 8 mV at >1 kOhm
-90 dBc = 4 nW
less than 2.0 kHz
up to 90%
better + 3db
better + 3db
better 60 dB (EN 300 135-1)
ca. 2 Watt to 8 Ohm load
10
For Packet Radio & others
Pin 1 Transmit audio
Pin 2 Ground
Pin 3 Receive audio
Pin 4 PTT key
μ
V EMF for 20 dB
μ
V EMF for 12 dB