Before Use; Charging The Battery Pack; Inserting/Removing The Battery Pack Into/From The Appliance - Parkside Performance Pptlba 40-Li C3 Originalbetriebsanleitung

Before use

Charging the battery pack

CAUTION!
►
charger.
WARNING!
Observe the safety instructions and
►
the instructions on charging and cor-
rect use given in the operating instruc-
and charger.
A detailed description of the charging
process and further information can
be found in these separate operating
instructions.
NOTE
The battery is partially charged. Ide-
►
ally, charge the battery completely
shortening its service life. Interrupting
the charging process does not dam-
age the battery.
►
to be stored for an extended period,
regularly. The optimum charge level is
climate should be cool and dry and
the ambient temperature should be
The recommended ambient tempera-
►
ture range for using tools and batteries
♦
2 from the appliance.
♦
the dual high-speed charger r .
Insert the mains plug into the mains
♦
When charging is complete, disconnect
♦
the dual high-speed charger r from the
mains and remove the respective battery
2 .
♦
r
cessive charging sessions. Also discon-
nect the mains plug.
Inserting/removing the battery
pack into/from the appliance
Inserting the battery pack
♦
the appliance (see Fig. A).
Removing the battery pack
♦
-
Fitting/removing the blower
WARNING!
►
remove the batteries 2 before carry-
►
personal injury!
NOTE
The appliance can be adjusted to your
►
ground as possible.
2 into
2
d and remove
2 .
4 as close to the
-
|