Turbo Mode; Battery; Ready2Connect Led - Parkside Performance Pptlba 40-Li C3 Originalbetriebsanleitung

WARNING!
►
for some time after the appliance is
ing tools.
NOTE
Observe noise protection and local reg-
►
ulations.
NOTE
►
secure footing.
Press the ON/OFF button w
♦
on the display.
♦
ON/OFF button w again.
♦
button for the speed level q.
Press
= one level higher
♦
Press
♦
The 4 speed levels on the control panel in-
–
–
–
–
♦
press the ON/OFF button w.
Press and hold the ON/OFF button w
♦

Turbo mode

Press the TURBO button e to change
♦
Press the TURBO button e again to end
♦
changes to the previously set level.
Checking the charge level of the

battery

The charge level indicator 8 signals the
-
OFF button w on the control panel.
indicated by the corresponding charge level
indicator 8
3 LEDs light up (red, orange and green):
Battery charged
2 LEDs light up (red and orange):
Battery partially charged
Battery must be charged

Ready2Connect LED

If smart battery functions are supported,
the Ready2Connect LED 9 lights up in the
Connect the battery pack
Connect to the app
LED stays on
Not connected to the app
Tool in update mode
Tool update successful
Tool update failed
2 as long
2 is
|