Safety Information; General Power Tool Safety Warnings; Electrical Safety - Parkside Performance Pptlba 40-Li C3 Originalbetriebsanleitung

Noise and vibration data
Noise measurement value determined in
Noise emission value
Sound pressure level
Uncertainty
Total vibration value
Vibration at handle
a < 2.5 m/s
2
h,
Uncertainty K = 1.5 m/s
NOTE
The vibration emission values and noise
►
emission values given in these instruc-
tions have been measured in accord-
dure and can be used for comparison
►
and the noise emission values can
load estimate.
WARNING!
►
sion values can deviate from the val-
ues given in these instructions during
Safety measures to protect the op-
►
erator must be established based on
an estimation of the vibration load
of operation must be included, e.g.
|
L = 73.6 dB
PA
K = 3 dB
= 91.7 dB
WA
2
-
-

Safety information

General power tool
.
safety warnings
WARNING!
Read all safety warnings, instruc-
►
tions provided with this power tool.
and/or serious injury.
Save all warnings and instructions for
future reference.
a) Keep work area clean and well lit.
b) Do not operate power tools in ex-
plosive atmospheres, such as in the
or dust.
may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Un-
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions.
-
-