MIX10NG2_BA_DE_2008:MIX10NG_BA_DE
01.02.2008
10:30 Uhr
Seite 27
MIX 10 NG2 – Operation
27
7.3.3 COM
In the "Port" menu you can activate the desired COM port to which the MIX 10 NG2 is to be connected. Parameters such as speed,
format and protocol are for your information and cannot be affected. Use the "connect" button to establish a COM connection between
MIX 10 NG2 and PC.
Switch-on state
Here you can enter the switch-on state of the MIX 10 NG2. You can select one of the previously saved presets. After turning on, the MIX 10
NG2 will load the settings of the selected preset 1, 2 or 3. Alternatively, you can save the state when the device was turned off by selecting
the "as switched off" button.
Load factory default
The MIX 10 NG2 is reset to the delivery state. The current settings are replaced by factory settings.
Warning: All saved presets and settings are lost!
Language
You can select if the menu is in English or German.
View message
Messages received or sent by the MIX 10 NG 2 are displayed in a pop-up window.