Ohmex RCL 1414 Gebrauchsanleitung Seite 27

RCL 1414
☞
The installation must be carried out following the manufacturer instructions.
A wrong installation could cause damages to people, animals or things, for
which the manufacturer cannot be considered liable.
• To avoid dangerous overheatings, to straighten the whole power cord and to use the
appliance as described in the "USE" paragraph is recommended.
• Do not leave the appliance unnecessarily inserted. Disconnect the plug from the mains
power supply when the appliance is not used.
• If the power cord of this appliance is damaged, it must be changed exclusively by a
technical assistance centre authorized by the manufacturer, since special tools are
necessary.
The electrical safety of this appliance is guaranteed only when it is correctly
connected to an effective grounding system as specified by the current
norms on electrical safety.
• It's necessary to check this fundamental safety condition and, in case of doubts, ask for
an accurate check of the system by professionally qualified personnel.
The manufacturer cannot be considered liable for possible damages caused by the
lack of grounding of the system.
• Before carrying out any operation turn off the appliance and disconnect the power
plug from the outlet and wait for the appliance to cool down completely.
• Don't connect the appliance to the power supply through external timers or remote
control systems.
The accessible surfaces temperature can be high when the appliance is
functioning.
The surfaces are subject to heating during use.
Burns danger !
Keep the electrical power cord away from the appliance hot parts.
Do not let the appliance unattended while it's working.
Place the appliance on an horizontal and very stable bearing plane, whose
surface is not delicate (ex. lacquered furniture, tablecloths etc.). Objects
like covers, pots etc. must not be placed on the appliance.
GENERAL WARNINGS
EN
24