Technical Specifications - Homcom 824-081V90 Bedienungsanleitung

MAIN BODY
1. Use a soft duster or a rag to dust off all the surfaces.
2. Clean the air inlet and air outlet using a vacuum cleaner regularly.
3. Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy water.
CAUTION! Ensure that water does not get inside the unit.
4. Use a dry cloth to thoroughly dry the unit before turning on.
AIR INLET AND INNER FILTER
1. Use a screwdriver to unscrew the two cover screws.
2. Remove the air inlet cover and wipe clean, or clean using a vacuum cleaner.
3. Use a duster to gently dust off the inner filter.
4. Replace the inner filter and air inlet cover and tighten the screws to fix it in position.
WATER TANK
WARNING!
Unplug the unit from the mains supply before removing the water tank.
●When the unit or the cool function will not be used for some time, empty the water
from the water tank.
●Use mild soap and water to clean the water tank.
●Allow it to air dry or wipe dry using a soft cloth. Make sure the water tank is
completely dry before replacing. This helps prevent any mold or mildew inside the
water tank.
●Empty the water and dry out the ice blocks before storage.
Make sure the air inlet cover and water tank are replaced in position before switching
on again.

TECHNICAL SPECIFICATIONS

Rated Voltage: AC220-240 V ~ 50 Hz
Rated Power:65W
Product Size:240 X 250 X 540mm
Tank Capacity: 3 Liters
Note: As a result of continual improvements, the design and specifications of the
product within may differ slightly from the unit illustrated on the packaging.
Off mode power
Standby mode power
Power management function
Time to enter automatically
off mode
Time to enter automatically
standby mode
P [N/A]
O
P 0.10
S O
[N/A]
T [N/A]
O
T [N/A]
S O
8
W
W
Min
Min