EN
OCEAN P7
Assembly
7
10
!
ATTENTION!
Perform the following steps
in the order indicated!
22
Shower panel
8
11
7.
Close shutt-off valves and mount reflux preventers with
dirt filter.
8.
Mount base plate with enclosed fixing material
(4x lens screws 5,5 x 50 mm) on the wall.
9.
Mount shower head with enclosed fixing material
(hexagon screw M8 x 25 mm) at the glass panel.
Attention: Screw head must be mounted inside of the panel.
10.
Fix the in the base plate pre-mounted connection hose at
the shower head.
11. Fix the shower head cover plate with 2 screws
(lens screws 2,2 x 9,5 mm) from above.
12.
Adjust desired settings on the electronics module.
(see page 20).
WimTec OCEAN P7
9
12