Riello Gulliver BS1F Montage- Und Bedienungsanleitung Seite 44

TEST HEAT GENERATOR
The working field has been defined according to EN 676 standard.
COMMERCIAL HEAT GENERATORS
The burner-heat generator team does not pose problems provided the generator and size of the combustion
chamber are similar to those provided for in standard EN 676.
If, on the other hand, the burner is teamed with a commercially-available heat generator and the combustion
chamber is much smaller than the size indicated in standard EN 676, you should consult the manufacturers.
CORRELATION BETWEEN GAS PRESSURE AND BURNER OUTPUT
To obtain the maximum output, a gas head pressure of 9.3 mbar, relatively to 912 T1 model, is measured
(M2, see chapter 3.5, page 9) with the combustion chamber at 0 mbar using gas G20 with a net heat value
3
of 10 kWh/Nm (8.570 kcal/Nm
12
10
8
6
4
2
0
0
0
3150
3
).
50 100
100.000
50.000
150
150.000
Thermal power
6 GB
D8933
200 250 kW
200.000 kcal/h