Parts List - Create Warm Handy Bedienungsanleitung

1. Main body
2. Paws
3. Grab handle
4. Temperature regulator
5. Power regulator
Before using the heater, attach the legs (supplied separately in
the box) to the unit.
• Carefully place the heater upside down on a stable, non-
scratchable surface. Be sure to protect both the finish of the
equipment and the supporting surface.
• Attach the legs to the base of the heater using the four screws
provided. Correctly align the legs with the bottom ends of the
side moldings and tighten the screws securely.
WARNING: This product should only be used in an upright position and with the legs properly
installed. Use in any other position may pose a safety hazard.
• Always place the heater in a safe location, following the safety precautions indicated in
this manual.
• Check that all packaging material has been completely removed before using the appliance.
• This heater is designed for portable use and does not require fixed installation.
• WARNING:
• Maintain a minimum distance of 1 meter between the heater and any objects, both in front
and on the sides and rear.
• Do not cover the heater at any time, as this may cause overheating.
• Never leave the heater on unattended.
• Take special care when choosing your location: do not place it near combustible materials,
as this could cause a fire.
• When you first turn on the heater, you may notice a slight odor or slight smoke. This is
normal and is due to the initial heating of the internal elements. The smell or smoke
should disappear after a short period of use.
E NGL I SH
8

PARTS LIST

MOUNTING
INSTRUCTIONS FOR USE