HMS M9239V Gebrauchsanweisung Seite 8

5. Saddle installation
a. Saddle installation — part I
Attach the saddle (20) to the bracket (62) using three nuts (59) and washers (55).
b. Saddle installation — part II
•
Unscrew the three nuts (59) and washers (55) located under the saddle (20).
•
Place the saddle on the saddle post (62) and secure it with the previously removed components.
• Place the saddle post (16) in the cover (26) and then place the whole assembly in the main frame (4).
•
Adjust the saddle to the correct height and tighten the knob (27).
•
Attach the adjustable saddle post (62) to the top of the post (16) using the knob (64).
• Note: After adjusting the height of the saddle, ensure that it does not exceed the marked line. The saddle must not be set higher than
the mark.
6. Pedal installation
•
Attach the straps (67) to the right and left pedals (40).
•
Then attach the pedals (40) to the crank (23).
•
Note: The left and right pedals and cranks are marked with the letters "L" (Left) and "R" (Right).
8
EN