Display Of Bcs R08Rre-Pi; Printing On The Sensor - Balluff Bcs R08Rre Serie Betriebsanleitung

BCS R08RRE-...
Capacitive Proximity Switches
4
Product description (continued)
4.3.2 Display of BCS R08RRE-PI... (with IO-Link)
The current display pattern results from various status
signals. The signal with the highest priority is displayed.
The signals are listed in descending priority.
Name Signal
Locator Green-yellow flashing (with long pause)
Short Circuit Pin 4 Green, fast flashing. Yellow is off.
Failure Green, fast flashing. Yellow is off.
Teach-In No Object Green, fast flashing. Yellow is off.
Teach-In Green-yellow flashing.
Function Display Green depending on device state, yellow static
and shows switching status.
Communication Green flashing, yellow depending on switching
status.
Ready Green static, yellow depending on switching
status.
Tab. 4-2: Meaning of the LED states with IO-Link sensor
For further information, see the configuration
guide at www.balluff.com on the product
page.
4.4

Printing on the sensor

BCSXXXX 1)
10..30 VDC
CCOOOOOOOOOSSSSS
1) Order code
Serial number
2)
Fig. 4-2: Labeling
10 english
Imax = 100 mA
2)
Meaning
The locator can be activated via a system
command to find the sensor again.
Short circuit at pin 4.
General error
The sensor is currently in teach-in mode, but no
object is visible. Teaching is not possible.
The sensor is currently in Teach-In mode.
The object has been detected, the switch point is
active.
Communication
The sensor is ready.