VEVOR R95-BMB Bedienungsanleitung Seite 6

TO TAKE CARE OF THE WICK:
1. The wick which is in glass fibre can not have its top scissored of lE.
2. But when it is used for a long time, a tar-like substabce is deposited on its top,
affecting the sucking up of fuel and the wick's vertical movement. To remove this
tar-like substance, you will wash the wick with kerosene, resulting in better
sucking up of oil and smoother movement of the wick.
3. You will wash the wick once in 20 to 30 days.
TO EXCHANGE WICKS:
1. Remove the guard frame by unscrewing the three
fixed nuts.
2. Remove the chimney.
3. Pull off the supporter by unscrewing the four fixed nuts.
4. Loosen the wick adjustment nut on the wick adjustment
by turning it counter-clockwise and pull the wick adjustment
towards you.
5. Pull up the wick holder together with the wick.
6. Clean the wick guide, supporter etc.
7. Remove the old wick from the wick holder.
5