Troubleshooting - Reolink Rp-Pcb8M Kurzanleitung

Troubleshooting

Wall Mount Ceiling Mount
Camera Is Not Powering On
If your camera is not powering on, please try the following solutions:
• Make sure your camera is powered properly. The PoE camera should be
powered by a PoE switch/injector, the Reolink NVR or a 12V power adapter.
• If the camera is connected to a PoE device as listed above, connect the
camera to another PoE port and see if the camera will power on.
• Try again with another Ethernet cable.
If these won't work, contact Reolink Support https://support.reolink.com/.
Picture Is Not Clear
If the picture from the camera is not clear, please try the following solutions:
• Check the camera lens for dirt, dust or spiderwebs, please clean the lens with
a soft, clean cloth.
11 English 12
English