Installing The Blades; Removing The Blades - Stihl Rga 140 Gebrauchsanleitung

English
1
► Remove screw plug (2).
► If no grease can be seen on the end of the
screw plug (2):
► Screw in the tube of STIHL gear lubri‐
cant (1).
► Squeeze 10 g of STIHL gear grease into the
gear housing.
► Unscrew the tube of STIHL gear lubri‐
cant (1).
► Insert and tighten the screw plug (2)
securely.
► Switch on the KombiEngine for 1 minute.
The STIHL gear lubricant is evenly distrib‐
uted.
18.3 Removing and Attaching the
Blade
18.3.1

Removing the Blades

WARNING
■ The cutting edges of the blades are sharp.
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
► Switch off the weeder.
1
2
3
4
► Unscrew the screw (1) clockwise.
► Remove the rider plate (2).
► Unscrew the screws (3) counterclockwise.
► Remove the blades (4).
► Unscrew the screws (5) counterclockwise.
► Remove the blades (6).
40
18.3.2
■ The cutting edges of the blades are sharp.
2
► Switch off the weeder.
► Fit blades (1).
► Screw in the screws (2) clockwise and tighten
► Fit blades (3).
► Screw in the screws (4) clockwise and tighten
► Fit the rider plate (5).
► Screw in the screw (6) and tighten it securely
18.4
■ The cutting edges of the blades are sharp.
► Switch off the weeder.
► Remove blades.
5
6
► Install the blades offset by 120°.
► If the blades have already been offset twice:
► If you are unsure: Consult a STIHL servicing

Installing the Blades

WARNING
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
2
1
them securely.
them securely.
counterclockwise.
Offsetting the Blades
WARNING
There is a risk of cutting oneself.
► Wear work gloves made of robust material.
Replace blades.
dealer.
18 Maintenance
6
5
4
3
120°
0458-845-9802-A