Operation - Fronius Acctiva easy 1204 Bedienungsanleitung

Operation

Dear reader, Thank you for the trust you have placed in our company and congratulati-
General remarks
ons on buying this high-quality product. These instructions will help you familiarise
yourself with the product.Reading the instructions carefully will enable you to learn about
the many different features it has to offer. This will allow you to make full use of its
advantages.
Please also note the safety rules to ensure greater safety when using the product.
Controls and
connections
Setting the If your device is equipped with a selector switch, it will be able to perform a number of
selector switch different functions (see rating plate):
-
-
„Wet" setting:
For charging liquid (Pb, gel, Ca, Ca silver) or fixed (AGM, MF, sealant) electrolyte batte-
ries that are used in starter or traction applications.
„Gel" setting:
For charging liquid (Pb, gel, Ca, Ca silver) or fixed (AGM, MF, sealant) electrolyte batte-
ries that are used in standby applications (e.g. emergency power systems) or at tempe-
ratures above 35°C.
Important! Do not charge dry batteries (primary cell) with this charger.
WARNING! An incorrectly set selector switch can lead to severe product
damage and poor results. Set selector switch according to the type of battery
used and/or battery voltage.
Charging voltage selector switch: e.g. 6/12 V or 12/24 V
Charging characteristic selector switch e.g. wet or gel battery
NOTE! Setting the selector switch incorrectly can result in the following:
- Charger displays incorrect test results
- Charger switches to „error"
- Battery will not be fully charged
- Vehicle power supply damaged (e.g. in back-up mode)
Hinged mains plug (0°, 45°, 90°)
LCD
Selector switch (depending on charger
type)
Socket for charger lead
1