VEVOR HJ-RB023B Bedienungsanleitung Seite 6

1.First, install and fix the left and right adaptor on the left and right sides of the front
and rear aluminum tubes, respectively, and fix them with M6 screws+M6 spacer;
then install them to the roof rack as shown in the picture.
Tips: Do not tighten the hexagon socket bolts yet .
2.Loosen the Allen head bolts.
Note: The lower arm/clamp cannot be completely separated from the adapter.
The degree of loosening of the upper screws of the adapter is: the lower arm/
clamp can rotate 90 degrees.
3. Rotate the lower arm 90 degrees.
4. Place the roof rack in the proper position on the roof rail, and guild the rail into
the slot.
5. Rotate the lower arm back to its original position.