Dimplex Optimyst MPT80 Installations- Und Bedienungsanleitung Seite 9

Installation
4
Place the log set
Installing the flue collar accessory
(optional accessory sold separately)
Place the log set inside the stove for the finished
look.
MPT100LS model only: Add logs in the log storage
below if desired. Do not fill above the spacer bar.
3
1. Open the door and remove the four screws for the
inner reflective panel. Set aside to refit later.
2. Unscrew the two screws holding the lid cap in place.
2
Use a small screwdriver through the hole to push up
the cap so it can be lifted and removed.
3. Fit the flue collar accessory onto the top lid and align
the fixing holes. Fit the two long screws provided
1
with the flue collar through the lid and secure with
nuts provided.
4. Refit the inner reflective panel with the four screws.
9