General Operation; Power Switch; Manual Controls - Dimplex Optimyst Mpt80 Installations- Und Bedienungsanleitung

Operation

General Operation

WARNING: This electric stove must be properly installed before it is used.
!
NOTE: After a power interruption the stove will return to Standby mode and retain the previously used settings.

Power switch

Note: This switch
must be in the
'ON' ( I ) position
for each appliance
to operate
Special Functions (using manual controls)
Disable heat: While product is running, hold heat button for 10 seconds to disable heat. The product will beep twice
to indicate heat is disabled. When the user tries to turn on the heat the product will beep 4 times and display CD52
on handset. To re-enable heat mode, hold heat button for 10 seconds while product is running. The product will beep
once and will resume normal heat function.
Auto-start at power on: While product is running, hold standby button for 10 seconds to enable auto-start when
product is powered on. The product will beep twice to indicate auto-start mode is activated. Heat does not auto-
start when this mode is active, the user must manually turn heat on. To disable auto-start, hold standby button for 10
seconds when product is running. The product will beep once to indicate auto-start is disabled. When powered on
the product will start in standby mode.
10

Manual controls

Standby and heat on/off
www.dimplexfires.com