Dimplex Optimyst MPT80 Installations- Und Bedienungsanleitung Seite 12

Operation
Standby
Flame
Intensity
Volume and
crackle sound
Heat On /
Manual Mode
High/low heat mode
Heat Off
(Remote)
Date/Time
(Remote)
12
Toggles standby on and off. There is a 45-second warm up sequence after pressing
this button before the flame starts.
Adjust the flame height of the product for optimal performance. There are six levels
of flame intensity. After prolonged use, a higher setting may be required to reach the
desired flame effect, which may indicate that the transducer needs to be replaced.
Press or on manual controls to desired Flame intensity
On remote, select and adjust as needed.
Please give the flame generator time to react to the changes you make.
Select the volume of the crackle sound from the five volume settings or to turn off the
crackle sound.
For authenticity you can add the sound of crackling logs to the flame effect. Select the
icon on the remote to adjust the sound level by pressing
to select. On the manual controls the
Press to turn heat on/off on manual controls.
With remote, after selecting
Note the default temperature setting is 21°C and the maximum temperature set point
on the product is 30°C. Press enter to confirm,
While heat menu is active, hold the advance button for 3 seconds to access the Hi/Lo
heat output menu. Hi = full heat output, Lo = half heat output, followed by ENTER to
select.
To turn Heat OFF, Press the Menu
symbol and press Enter to select.
Date and time must be set up prior to use or after changing the batteries. To set the
date and time on the remote:
1. Press Enter when the
2. Press and to set the Hour, press
Note: this product uses as 24-hour clock.
3. Press and to set the Minutes, press
4. Press and to set the Day, press
5. Press and to set the Month, press
6. Press and to set the Year, press
7. Press and to select ON/OFF for the Daylight saving time, press Enter to confirm
and returns to home screen.
button turns the sound on/off.
, use or adjust to the desired room temperature.
or Back button, then use
is blinking
or followed by ENTER
or to highlight the
www.dimplexfires.com