Loading bucket
lifts by the stirring
2
blade,unable to
lock in place.
Initial operation
results in loud
3
scraping or
jamming of the
stirring blade.
At the end of
making
slush, the
blender blades
4
are scratched or
stuck, causing
E4 or E1 to be
displayed.
Inability to make a
slush
using the SPIKED
SLUSH function,
5
causing the
display to
show E5.
The stirring blade
is not placed
correctly and
needs to be fitted
onto the shaft.
Improper use of
the stirring blade
leading to
deformation.
The ingredient
contains less
than 6% sugar.
The mixture has
an alcohol
content that is
too high.
- 25 -
Place the stirring blade
correctly.
Purchase a new
stirring blade from the repair
center.
Add one of the following:
white sugar, coconut sugar,
honey, maple syrup, agave
nectar, flavored syrup, or fruit
juice. Then, power off and
reset the machine. After
waiting for 10 minutes, turn it
on again to proceed with
making the slush.
Note: Before pouring, mix
the additional sugar with
the existing ingredients.
Ensure the alcohol content
is between 4% and 16%.
Therefore, you need to add
water,soda water, tonic
water,or coffee(one of them)
to dilute the alcohol content.
After that, power off and
reset the machine. Turn it on
again to proceed with
making the drink.