Connect To Power Supply - Vevor R1-Rxr02-N7-3-01 Bedienungsanleitung

6. After enjoying your slush, it is recommended to pour in 2L of clear water
and activate the cleaning function. After 5 minutes, drain the water (if
necessary, repeat this step until the frozen beverages are thoroughly
flushed from the evaporator) .
7. Press the power button to turn off the machine and unplug it. Hand wash
all parts or thoroughly clean them in a dishwasher after each use (Do not
use the heated dry cycle cleaning function), and finally reassemble the
components back into the main unit.
Instructions

1.Connect to Power Supply:

Plug the power cord into a suitable socket, ensuring that the shape and
voltage of the socket match the specifications indicated in the instructions.
2.Button Control Functions:
(1) Custom Made Function:
This function allows the user to set the temperature themselves, by
adjusting the desired temperature with the "+"and"-"buttons. After the
temperature is set, press the"Start"button to begin making the slush. If you
press the"Pause"button during the process, you can switch to other
functions or other temperatures. Once the slush is made, the machine
will automatically switch to the insulation mode (displaying COOL) .
Note: If the temperature is set too low, it may cause the motor to stall or the
slush to overflow.
(2) Cold Drinks Function:
Touch the button to access the cold drinks function. Adjust the desired
level with the "+" and " - " buttons. After setting the temperature, press the
"Start" button to begin making the cold drinks. If you press the "Pause"
button during the process, you can switch to other functions or other
temperature levels. Once the cold drink is made, the machine will enter the
- 17 -