VEVOR R1-RXR02-N7-3-01 Bedienungsanleitung Seite 26

Note: Please ensure that the power plug is disconnected before cleaning
to avoid the risk of electric shock.
(1) Remove the loading bucket assembly and rinse it thoroughly with water
and clean it with a damp cloth. Do not use abrasive cleaning pads to scrub.
(2) Remove the mixing blade, rinse it thoroughly with water and clean it
with a damp cloth.
(3) Remove the loading sealing ring, water box, decorative cover of the
water tray, and the water tray. Rinse them thoroughly with water and
clean them with a damp cloth.
(4) Wipe clean any dirty areas on the cooling bucket and the machine body
with a damp cloth. Do not directly rinse the cooling bucket and machine
body with water, and do not immerse the machine body in water or pour
water into the side vents.
(5) Dry all parts with a clean cloth and reassemble them in their original
positions.
NO Problems
Leakage at the
back of the
1 loading
bucket.
Maintenance
Troubleshooting
Analysis
The knob is not
turned to
the"lock"position.
The sealing ring
is loose or
installed
upside down or
missing.
- 24 -
Solution
Turn the knob to the
"lock"position.
Before installing the charging
barrel, you need to ensure
that the sealing ring is
correctly installed in place.