Blower Housing - Opera Nivel Pro Installationshandbuch

SURFACE MOUNTED
2
1
1. Sealing tape.
2. Black, heat resistant silicone sealant.

3.6 BLOWER HOUSING

• The inlet opening is at the center of the blower housing. If necessary (i.e. in case of wall
mounted cabinets) the metal sheet plate at the top can be rotated to an asymmetric
configuration.
• Install the blower housing in such a way that the front panel is accessible without having
to remove the blower housing from the cabinet.
• The plastic outlet curve can be rotated to change the direction in which the airflow is
blown out of the blower housing.
• When using cabinets with a plinth height less than 100 mm, remove the plastic outlet
36 | ASPIRATION HOB
Dimensions [mm]
NIVEL 930
NIVEL PRO
Asymmetric inlet
Symmetric inlet
FRONT
A
A B F
905 490 > 110
905 540 > 95