Opera Nivel Pro Installationshandbuch Seite 35

3.5 WORKTOP CUT-OUT
• Worktop cut-out must be moisture-sealed using suitable means and, where necessary,
fitted with a thermal insulator.
• The cut-out in the workshop should be made as accurately as possible with a good,
straigt saw blade or a router.
• The glass ceramic hob surface must be flat and flush. Tensioning can cause the glass
plate to break.
FLUSH MOUNTED
2
1
1. Sealing tape.
2. Black, heat resistant silicone sealant.
Dimensions [mm]
NIVEL 930
NIVEL PRO
FRONT
A
C
A B C
905 490 934 524
905 540 934 584
D E F
7 > 110
7 > 95
NIVEL | 35