After Use; Switching The Machine On And Off - Vevor R2103 Bedienungsanleitung

・ Dust from material such as paint containing lead, some wood species, minerals
and metal may be harmful (contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or bystanders);
wear a dust mask and work with a dust extraction device when connectable
・ Certain kinds of dust are classified as carcinogenic (such as oak and beech dust)
especially in conjunction with additives for wood conditioning; wear a dust mask
and work with a dust extraction device when connectable
・ Follow the dust-related national requirements for the materials you want to work
with
・ Do not clamp the tool in a vice
・ Use completely unrolled and safe extension cords with a capacity of 16 Amps
(U.K. 13 Amps)
AFTERUSE
•After switching off the tool, never stop the rotation of the accessory by a
lateral force applied against it
USE
Blade Installation and Replacement
Turn the Tension Handle A clockwise to release Blade tension
Set the blade into both Guide Bearings J, making sure the Blade is centered on
them Hold the blade on the guides and push in. Make sure the blade evenly fits
around the wheels.
Turn the Tension Handle A until the blade is taut and the handle "Tight" .
Plug in the tool and put on your ear/eye protection, and turn on the tool. Inspect the
blade and make sure it runs steady and evenly around the wheels, and that the
teeth are pointed in the correct direction.
Guide Bar Assembly
Assemble the Guide Bar G to the bandsaw before operation
Release the Screws I on the Frame.
Move the Guide Bar G around the blade as shown 3 , then lock the screws.

Switching the machine on and off

Turn on/off the Portable Band Saw by switch F electronic speed control.
Adjust the speed by turning the speed dial E, user can choose different speed for
different cutting materials.
- 9 -