Dell PowerVault MD1200 Handbuch Zum Einstieg Seite 10

Redundant Array of Independent Disks (RAID)
Controller
Management
Back-Plane Board
Connectors
Sensors
Back-Panel Connectors
SAS connectors (per EMM)
Serial connector (per EMM)
LED Indicators
Front panel
Hard-drive carrier
8
Getting Started With Your System
Host-based RAID support using
PowerEdge™ RAID controller H800
RAID management using
Dell OpenManage™ Server
Administrator 6.2 or later.
• 12 SAS hard-drive connectors
• Two power supply/cooling fan
module connectors
• Two sets of EMM connectors
• One control panel connector for front LEDs
and enclosure mode switch
Two temperature sensors
• One SAS IN connector for connection
to the host
• One SAS OUT connector for expansion
to an additional enclosure
NOTE:
SAS connectors are SFF-8086/SFF-8088
compliant.
One 6-pin UART mini-DIN connector
NOTE:
For engineering use only
• One two-color LED indicator for
system status
• Two single-color LED indicators for power
and split mode
One single-color activity LED
One two-color LED status indicator per drive