Safety; Explosion Protection; Operation Requirements - Nederman Filterbench Bedienungsanleitung

4

Safety

NOTE!
Disregarding NEDERMAN safety regulations entails a heavy safety
risk.
These safety regulations cover safety issues in connection with the installation,
operation, inspection and maintenance of FilterBench. Therefore not every
topics mentioned in this chapter directly refer to that product.
Different precautions are included for the family of product FilterBench. By
using these according to their purpose and by following the safe practice
during daily operation, the risk by using the filter system is minimized to the
residual risk.
NOTE!
Carefully read Chapter '4 Safety' directions before any activity is
commenced. If the safety directions are not observed, this can result in severe
personal injury.
Before the plant is in any way started, all screens, doors etc. must be closed
and locked in place.
4.1

Explosion protection

NOTE!
In order to prevent the explosion/fire the following must be taken into
account:
1. It is prohibited to get close with open fire and to perform any activities
leading to creation of sparks, fire, hot particles of any material through
welding, polishing, cutting, drilling steel or smoking. This activities
should be done 3 meters from the machinery.
2. Elements of the machinery and area around should be regularly cleaning
in order to removed residual dust because of possibility of explosion/fire.
3. It is prohibited to maintain and store combustible materials within
the established and marked zone within the distance of 3 m from the
machinery.
4. It is prohibited to provide temporary power installations, and the power
system cannot be repaired by persons, who do not have the required
certificates.
5. It is prohibited to block the way or otherwise hinder access to:
• Fire protection equipment,
• Switches and power distribution boards.
4.2

Operation requirements

WARNING! Risk of personal injury, fire or explosion.
Always isolate the main power before changing filters or removing any
components from the FilterBench.
6. FilterBench should be installed in accordance with the requirements
specified in the chapter „8 Installation" of the present instruction manual.
7. FilterBench is design for indoor installation only and must be protected
from excessive moisture.
8. Always make sure that good access is provided for the maintenance of the
FilterBench.
FilterBench EN
QMM043(A) 53