Product Marking; Preface; Notices On Hazards - Nederman Filterbench Bedienungsanleitung

EN FilterBench
1.1

Product marking

NEDERMAN
pattern:
FilterBench
where:
FilterBench - constant part of the marking,
AA
- two digit number that corresponds to the max. air flow [(AA) x 100 m
2

Preface

Your FilterBench has been produced by:
NEDERMAN Manufacturing Poland Sp. z o. o.
ul. Okólna 45 A
05-270 Marki, Poland
tel: +48 22 7616000
fax: +48 22 7616099
www.nederman.com
This manual is for the correct installation, use and maintenance of your
FilterBench. Read it carefully before using this product or carrying out
maintenance. Replace the manual immediately if lost.
This product has been designed to meet the requirements of relevant EC
directives. To maintain this status, all installation, repair and maintenance
work for this product is to be carried out by qualified personnel using
only original spare parts. Contact the nearest authorized distributor or
NEDERMAN for advice on technical service and obtaining spare parts.
NOTE!
NEDERMAN continuously improves its products' design and efficiency
through modifications, and reserves the right to do so without introducing
these improvements to previously supplied products. NEDERMAN also
reserve the right to, without previous notice, modify data and equipment as
well as operating and maintenance instructions.
3

Notices on hazards

This document contains important information that is presented either as
a warning, caution or note. See the following examples:
WARNING!
Warnings indicate a potential hazard to the health and safety of personnel, and
how that hazard may be avoided.
Caution! Type of risk.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE!
52 QMM043(A)
FilterBench is named and marked according to the following
AA
Read Chapter '4 Safety' thoroughly.
Type of injury.
Notes contain other information that is important for personnel.
3 /h].