Silvercrest SAS 7.4 LI B3 Bedienungsanleitung Seite 54

1) Remove the handheld vacuum cleaner from the wall bracket 3 or, if you are
not using the wall bracket 3 remove the barrel plug 5 from the socket.
2) If required, place the appropriate nozzle in the suction opening:
the crevice nozzle 2, to clean narrow and difficult to reach locations.
–
the wet suction nozzle 1 to vacuum up liquids.
–
NOTE
► After you have vacuumed up liquids, immediately clean the dirt container q.
Otherwise, bacteria or mould will build up inside! Ensure that the dust filter
bag 9 is completely dry before using the appliance again.
NOTE
► If you have vacuumed liquids, always carry the appliance with the wet
suction nozzle 1 pointing downwards:
► If you carry the appliance horizontally or with the wet suction nozzle 1
pointing upwards, it is possible that liquid can leak out:
3) To switch the appliance on, slide the on/off switch 6 forwards. The charge
indicator lamp 7 lights up green.
SAS 7.4 LI B3
GB │ MT │ 51 ■