VEVOR HJ-RB023B Bedienungsanleitung Seite 6

2. Loosen the Allen head bolts.
Note: The lower arm/clamp cannot be completely separated from the adapter.The
degree of loosening of the upper screws of the adapter is: the lower arm/clamp c
an rotate 90 degrees.
3. Rotate the lower arm 90 degrees.
4. Place the roof rack in the proper position on the roof rail, and guild the rail into
the slot.
5. Rotate the lower arm back to its original position.
6. Tighten the upper Allen bolts.
7. Tighten the lower Allen bolts.
8. Place the other roof rack 24"-32" away from the first one. Repeat steps 2 to 7 to
install.
9. Tighten and check before daily use.
- 5 -
For 2019-2021 SUBARU FORESTER
For 2018-2024 SUBARU Crosstrek
For 2014-2018 SUBARU FORESTER