Bosch GCM 10 SD Professional Originalbetriebsanleitung Seite 40

OBJ_BUCH-1128-002.book Page 40 Tuesday, July 13, 2010 11:27 AM
40 | English
25 On/Off switch
26 Transport safety-lock
27 Adjusting screw of depth stop
28 Transport handle (rear)
29 Locking screw for slide device
30 Scale for bevel angle (vertical)
31 Angle indicator (vertical) for leftward bevel
angle range
45°– 0
32 Adjustment knob for 33.9° bevel angle
33 Socket spanner (14 mm)/
Allen key (4 mm)/Phillips screwdriver
34 Lock screw of the length stop
35 Length stop
36 Saw-Table extension
37 Tensioning lever for saw-table extension
38 Scale for mitre angle (horizontal)
39 Knob for adjustment of the bevel angle
range
40 Spindle lock
41 Locking lever
42 Tool storage
43 Fastening screws for tool storage
44 Fastening nut for tool storage
45 Open-end spanner (17 mm; 10 mm)
46 Allen key (3 mm)
47 Allen key (size 1,5 mm)
48 Extraction adapter
49 Sawdust ejector
50/51Phillips screw (attachment of retracting
blade guard)
1 609 929 X04 | (13/7/10)
52 Hexagon bolt for saw-blade attachment
53 Washer
54 Clamping flange
55 Interior clamping flange
56 Holes for quick-action clamp
57 Clamping lever of the quick-action clamp
58 Threaded rod
59 Screws for insert plate
60 Clamping screw of the length stop
61 Button for rapid-setting of the adjusting
screw 27
62 Depth stop
63–66
Set screws for 0° basic setting (bevel angle)
67 Set screw for 45° basic setting (leftward
bevel angle)
68 Set screw for 45° basic setting (rightward
bevel angle)
69 Set screw for clamping force of clamping le-
ver 14
70 Set screw for clamping force of clamp 3
71 Angle indicator (horizontal)
72 Adjustment screw of the fence extension
73 Allen screws (14 mm) of the fence
74 Recessed grips
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools